Wednesday 5 October 2016

DIY hooded shawl/cloak

img114.jpg

the rectangule piece should be 10cm long x about 4cm wide. 
The "L" shape is 10cm (from corner to tip) on the outside & 4.5cm on the inside X 3cm wide. 
Those are the measurements for the child's size. If you add a couple of cm to the lengths it could end up adult size (I'll play around with it a bit to get better measurements)

Also to fit rabbit ears you could cut holes it the top, but I haven't tried that yet.


you will need:
material/cotton
interfacing (I find iron on interfacing best)
scissors
thread
needle

Method:
attach material to interfacing
Cut 1 of each piece of pattern



fold rectangle in half, sew along one side from fold down to end





pin end of seam to middle of shawl piece (the one that looks like an "L" shape)
sew pieces together



iron on interfacing will keep to material from fraying





print image to A4 for correct sizing

4 comments:

  1. Thanks for this Chill. Am definitely going to have to try this.

    ReplyDelete
  2. This looks so cute on your figure! Great job.
    Emily

    ReplyDelete
  3. You make it look so easy. I always struggle because the small bits of fabric are so fiddly.

    ReplyDelete